Cutting fluid

This article is licensed under theGNU Free Documentation License.It uses material from the Wikipedia article "Cutting fluid" (click for full Wikipedia text)

 'Cutting fluid ' or  'coolant ' is liquid used to cool and lubricate the cutting edges of machine tools and the pieces they are shaping. It is pumped over the cutting site of machines such as Lathe (metal)s, milling machines, shapers and saws. Metal cutting operations involve generation of heat due to friction between the tool and the pieces and due to energy lost deforming the material. This heat needs to be carried away otherwise it creates "white spots". Water is a great conductor of heat but is not stable at high temperatures, so stability is often achieved by making an emulsion of water with oil. There are three types of coolants. Mineral, semi-synthetic and synthetic. Mineral coolants are cheap and have a short life. Semi-synthetic coolants use special chemicals to solubalize the oil into water. Synthetic coolants do not contain oil and hence are much more stable but more expensive. Bacterial growth can be a problem in cutting fluids that contain water. In case the oil forms a layer on the top of liquid, anaerobic bacterials proliferate due to warm temperatures. This leads to a bad smell and renders the fluid unusable. The properties that are sought after in a good cutting fluid are the ability to:

keep the workpiece at a stable temperature (critical when working to close Tolerance (engineering)s).

maximize the life of the cutting tip by lubricating the working edge and reducing tip welding.

prevent the growth of bacteria or fungi. Cutting fluid may also take the form of a paste when used for some applications, in particular hand operations such as drill and taps and dies. In many areas, disposal of cutting fluid is subject to environmental regulations intended to prevent pollution. Modern cutting fluid disposal may involve techniques such as ultrafiltration using polymeric or ceramic membranes which concentrates the suspended and emulsified oil phase.

Other lubricants

• Dielectric fluid is the cutting fluid used in Electrical discharge machining (EDM). It is usually deionized water or a high flash point kerosene. Intense heat is generated by the cutting action of the electrode (or wire) and the fluid is used to stabilise the temperature of the workpiece, along with flushing any eroded particles from the immediate work area.
• Kerosene has been used when working on aluminium.
• Lard for press tool work
• Mineral oil
• WD-40
  
  This article is licensed under the GNU Free Documentation License.It uses material from the Wikipedia article "Cutting fluid" (click for full Wikipedia text) Hide